 |
 |
|
|
|
VOLUME CONTROLS WITHOUT COMPROMISE FROM
DANISH AUDIO CONNECT: CT1 & CT2
Dact audio attenuators are arguably the finest volume controls available today. Gold plated contacts/wipers, non-inductive surface mounted resistors configured on the shortest imaginable signal path linked by gold plated tracks result in absolute sonic precision. The specifications to follow speak for themselves: -
Resistance tolerance: 0.1%
Attenuation accuracy: 0.05dB
Channel balance: 0.05dB
Contact resistance: 0.01 Ohm
Rotational angle: 300o +/-5o
Capacity between contacts: 0.001nF
Series inductance (10k Ohms signal to ground): 0.0002mH
Attenuation levels/source impedance = 0 Ohms: 0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,
30,34,38,42,46,50,60,
Current ratings: 2 Amps at 2 Volts
0.6 Amps at 24 Volts
0.4 Amps at 42 Volts
Maximum power dissipation of one SMD: CT1 = 125mW
CT2 = 100mW
Operating temperature: -25oC - +85oC
Switching angle: 15o
Distortion: less than 0.0001%
DACT CT3 INPUT SELECTOR SWITCH
The CT3 utilises the same Swiss-made precision mechanism as the renowned CT1 and CT2 attenuator volume controls. This guarantees highest contact pressure and therefore the lowest resistance loss. All switch/wiper contacts are gold plated. Inadvertant shorts either to ground as well as signal sources are totally avoided as both signal path and ground are simultaneously switched, also avoiding unwanted ground loops. The CT3 selector switch offers the selection of 5 stereo inputs.
Gold plating: Layer-thickness of contacts = 8um
Gold plating: Layer-thickness of wipers - 3um
Switching current ratings:
2 Amps at 2 Volts
0.6 Amps at 24 Volts
0.4 Amps at 42 Volts
Operating temp: -25oC - +70oC
Switching angle: 15o
Mechanical life: 25000 operations
Switch operation force: 1.5Ncm
High quality knobs machined from solid stainless steel are available for all DACT switch/attenuators.
Diameter: 25mm
Height: 25mm
Inside diameter: 6mm
All DACT products are presented mounted within a transparent box.
Diagram headings:
CT3 connections (rear view)
Switch configuration (Belegung)
Dimensions in mm
|
|
|
|
|
| |
 Extended product search NEW
| |
|
|
|
|
 | | CT100
CT100
Ref. No.: 700400
DACT PHONO STAGE MODUL CT 100CT100 - phono stage / RIAA preamplifier module. Two channels, dual mono. The CT100 is a two-channel phono preamplifie | | Stock: 
Availability: n/a
1.110,00 € / Piece
zzgl. Versandkosten
932,77 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | CT101
CT101
Ref. No.: 700401
DACT LINEAR AMPLIFIER MODUL CT 101CT101 - line stage / linear preamplifier module. Two channels, dual mono. CT101 is a linear 2-channel widebanded a | | Stock: 
256,20 € / Piece
zzgl. Versandkosten
215,29 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | CT102
CT102
Ref. No.: 1384026
DACT PHONO STAGE MODUL CT 102Audio power supply module. Switchable between +/-15VDC and +/-20VDC output. Including switch mode mains adapter 100-250 | | Stock:
Availability: n/a
467,60 € / Piece
zzgl. Versandkosten
392,94 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | CT3-5-4 PCB
CT3-5-4 PCB
Ref. No.: 1384020
DACT CT3 Input Selector Switch 4-pole input selector switch with 2-5 positions (¿programmable¿). Available with either solder lugs for wires (CT3-5 | | Stock:
Availability: n/a
128,00 € / Piece
zzgl. Versandkosten
107,56 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | CT3-5-4 WIRE
CT3-5-4 WIRE
Ref. No.: 700330
CT3-5-4 WIREDACT CT3 Input Selector Switch 4-pole input selector switch with 2-5 positions (¿programmable¿). Available with either solder lugs fo | | Stock:
Availability: n/a
116,80 € / Piece
zzgl. Versandkosten
98,15 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | TC-906
TC-906
Ref. No.: 1400322
LAUTSPRECHER-STEUERZENTRALE TC-906 MIT LAUTSPRECHERREGELUNG FÜR BIS ZU 6 LAUTSPRECHER
| | Stock:
175,00 € / Piece
zzgl. Versandkosten
147,06 €
|
|
|
|
|
|
|
| |
|
|
|
|
 | | MHS8/50
MHS8/50
Ref. No.: 1342696
PEGELSTELLER MHS8/50 8 OHM 50 WATT MIT LED-LEVELMETER
| | Stock:
Availability: n/a
21,80 € / Piece
zzgl. Versandkosten
18,32 €
|
|
|
|
|
|
|
|
|
Lautsprechershop | 
