We use cookies on intertechnik.com

We use cookies to personalize content and advertisements, to offer you the best possible website experience and to analyze traffic to our website.
For more information, see our Data protection information and in the imprint .

Consent Settings

Here you can configure the permitted cookies yourself.

Technical and functional cookies, for the best user experience
?
Marketing cookies to ensure the success measurement and personalization of campaigns
?
Tab2
  • flag enflag deflag esflag frflag itflag nl

2 way base module (large)

RRP: 50,56 € incl. Vat.
50,56 €
incl. Vat. plus Delivery costs
42,49 € excl. Vat

Manufacturer: Intertechnik


Price incl all variants
incl. Vat.
available
Delivery: 1-2 days

6,55 € to Germany


Categories: Circuit boards
Share this article on
Module PCB LP-L3/2W (Large) up to 18 dB The requirements for a passive crossover for loudspeakers are manifold. For the 2 way shelf speaker they look different than for the 3 way speaker. Common to all crossovers is that they consist of combinations of low pass and high pass filters as well as voltage dividers. With the IT. PCB system a large number of crossovers can be built with only 11 PCBs. The PCBs are offered in three sizes to accommodate small as well as high power handling (component sizes): L/M/S Base for the crossover of each combination is a PCB which allows the construction of a low pass and a high pass with voltage divider. 2-way base plate (small): (low pass 12 dB / high pass 12 or 18 dB ) 2-way base plate (medium / large): (low pass 12 dB / high pass 12 or 18 dB ) 2-way loudspeaker If a crossover is to be set up for a 2-way loudspeaker, one of the above PCBs is sufficient. 2 1/2-way loudspeaker If a 2-way loudspeaker combination is supplemented with an additional loudspeaker in the low frequency range, this is referred to as a 2 1/2-way combination. In addition to a 2-way base plate, a low-pass circuit board is required, which is available in three sizes: low-pass circuit board (small / medium / large): (low-pass 12 dB) 3-way speaker For the crossover section of the woofer you need, as with the 2 1/2-way combination, a low-pass PCB. The midrange driver is equipped with a high-pass and a low-pass, so that in addition to the 2-way basic PCB you need a high-pass PCB, which is also available in three sizes: High-pass PCB (small / medium / large) : (high-pass 12 dB) RLC equalisation Sometimes it is necessary to use corrective elements to influence the sound pressure or impedance response in addition to the basic crossover circuit. RLC

Order-No. 1500646

Accessories