Language DE Language EN Language FR Language IT Language NL
EUR
  • EUR
  • USD
  • JPY
  • BGN
  • CZK
  • DKK
  • GBP
  • HUF
  • PLN
  • RON
  • SEK
  • CHF
  • ISK
  • NOK
  • HRK
  • RUB
  • TRY
  • AUD
  • BRL
  • CAD
  • CNY
  • HKD
  • IDR
  • ILS
  • INR
  • KRW
  • MXN
  • MYR
  • NZD
  • PHP
  • SGD
  • THB
  • ZAR
0
Login
Call Intertechnik
Write Intertechnik
Intertechnik Logo
Language DE Language EN Language FR Language IT Language NL
EUR
  • EUR
  • USD
  • JPY
  • BGN
  • CZK
  • DKK
  • GBP
  • HUF
  • PLN
  • RON
  • SEK
  • CHF
  • ISK
  • NOK
  • HRK
  • RUB
  • TRY
  • AUD
  • BRL
  • CAD
  • CNY
  • HKD
  • IDR
  • ILS
  • INR
  • KRW
  • MXN
  • MYR
  • NZD
  • PHP
  • SGD
  • THB
  • ZAR
Login
0

Shop

UM10-22

UM10-22


Order-No. 1386097

231,70 € / Piece
incl. Vat. add. delivery
194.71 € excl. Vat
Stock: available but short stock
Quantity: 
Seen this article cheaper?
UM10-22 10" Ultimax DVC Subwoofer 2 ohm Per Coil Dayton Audio"s Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design. - Dual 2 ohm, 2-layer copper voice coils - Large vented pole piece and under-spider venting - 500 watts RMS power handling - Black anodized aluminum former and black pole improves heat dissipation - Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber - Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area - Dual linear stiffness spiders limit distortion and rocking modes The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer test the strength of your foundation with fast, articulate, gut-wrenching bass. Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility. To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils. Nearly 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation. A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures. Cabinet recommendations: Sealed 0.5 cubic ft. (net internal), f3 of 48 Hz with a 0.707 Qtc alignment Vented 1.25 cubic ft. (net internal) tuned to 25 Hz with two 2" diameter by 20" long dual flared Precision Port tubes, f3 of 26 Hz

Order-No. 1386097

Features

Typ Subwoofer
SPL (1W/1M) 83,40
fs 26,2
Hersteller / Marke Dayton
I.T. Intertechnik
I.T. Intertechnik Kerpen GmbH Located at Europaring 28, 50170 , Kerpen Germany, . Phone: +490227390840. https://www.facebook.com/Lautsprecherbau https://twitter.com/it_intertechnik https://plus.google.com/111120951705739054145/about https://plus.google.com/102648362843691426793/about https://www.youtube.com/user/lautsprecherbau